TRA Australia's 11-inch caravan roof vents are designed to suit a 280 × 280 mm roof cut-out, making the range easy to compare when replacing an existing compatible vent or planning...
TRA Australia's 11-inch caravan roof vents are designed to suit a 280 × 280 mm roof cut-out, making the range easy to compare when replacing an existing compatible vent or planning a new installation. While every model in this range uses the same cut-out size and includes an LED light garnish, the required roof thickness, lid design, motor and method of operation vary between models, so these specifications should be checked carefully before choosing your roof vent.
Why Choose a TRA 11-Inch Caravan Roof Vent?
| ✓ | 280 × 280 mm Cut-Out Every roof vent in the TRA 11-inch range is designed for a 280 × 280 mm roof opening, providing a common starting point when comparing compatible models. |
| ✓ | LED Light Garnish Included Every TRA 11-inch roof vent includes an LED light garnish, combining roof ventilation with useful integrated interior lighting around the vent opening. |
| ✓ | Different Roof Thickness Options Models suit different roof thicknesses, allowing the range to accommodate different caravan, RV and motorhome roof constructions. |
| ✓ | Different Lid Configurations Choose between the available lid designs and finishes according to the individual model and your installation requirements. |
| ✓ | Manual & Powered Options Different models provide different methods of operation, including manual and powered ventilation options depending on the application. |
| ✓ | Designed for Caravan & RV Applications Compact roof ventilation options suitable for a range of caravan, RV and motorhome installations, including selected bathroom and shower applications. |
How to Choose an 11-Inch Roof Vent
| Check | What You Need to Know |
|---|---|
| Roof Cut-Out | All models in this category suit a 280 × 280 mm roof cut-out. |
| Roof Thickness | Measure the complete roof thickness and compare it with the specified range for the individual model. |
| Lid | Compare the lid type, finish and operation of the individual models. |
| Ventilation | Decide whether your application requires passive ventilation or a powered motor and fan. |
| Operation | Check how the individual vent and lid are operated and whether electrical power is required. |
| LED Light Garnish | All models include an LED light garnish. Check the individual product specifications for operating details. |
| Application | Check that the selected model is appropriate for the intended location and ventilation requirements. |
The Cut-Out Is the Same — The Models Are Not
A major advantage when comparing TRA's 11-inch roof vents is that the entire range shares the same 280 × 280 mm roof cut-out. However, this does not mean every model is directly interchangeable in every installation.
The individual vents can suit different roof thicknesses and use different lids, motors and operating systems. When replacing an existing vent, check all of these specifications rather than relying on the roof opening alone.
Check Your Roof Thickness
After confirming the 280 × 280 mm opening, roof thickness is one of the most important fitment measurements. Measure the complete roof thickness at the installation location and compare this measurement with the specifications of the individual roof vent. Different models within the 11-inch range are designed to accommodate different roof thicknesses.
Manual vs Powered 11-Inch Roof Vents
Manual models provide a straightforward ventilation solution where powered airflow is not required. Powered models incorporate a motor and fan to provide active ventilation or extraction.
Motor specifications and operation vary between models, so check the individual product page for its electrical requirements, controls and functionality before purchasing.
LED Light Garnish Included
Every TRA 11-inch roof vent in this range includes an LED light garnish. This integrates interior lighting around the roof vent and allows the vent opening to provide both ventilation and a practical lighting function. Roof vent and lighting operation can vary between models, so refer to the individual product specifications for details.
Professional Installation Recommended
Correct installation and sealing are particularly important with any product fitted through a caravan or RV roof. The mounting area must be properly prepared and the roof vent correctly fitted and sealed to help prevent water ingress. Powered models and LED lighting must also be electrically installed correctly for the individual unit.
TRA Australia recommends professional installation by an appropriately licensed installer. Warranty does not cover faults or damage resulting from incorrect installation, including water ingress, electrical damage or damage caused during installation.
💡 TRA Expert Tip
If you're replacing an existing 280 × 280 mm roof vent, don't stop once the cut-out matches. Measure the roof thickness and compare the lid, motor and operating system of the replacement model. These differences can determine whether a particular 11-inch vent is suitable for your installation.
$150.00Original price was: $150.00.$135.00Current price is: $135.00.$170.00Original price was: $170.00.$153.00Current price is: $153.00.$69.00Original price was: $69.00.$49.00Current price is: $49.00.
FREQUENTLY ASKED QUESTIONS
All roof vents in TRA Australia’s 11-inch range are designed to suit a 280 × 280 mm roof cut-out.
Yes. All models in this category suit a 280 × 280 mm cut-out. However, the models suit different roof thicknesses and can have different lids, motors and methods of operation, so the cut-out is not the only compatibility check.
After confirming a 280 × 280 mm roof opening, check your roof thickness and compare the lid, motor, operation and intended application of each model.
Yes. Different TRA 11-inch roof vents suit different roof thicknesses. Measure the complete roof thickness at the installation location and compare it with the specifications of the individual model.
Manual models provide ventilation without a powered fan, while powered models use a motor and fan for active ventilation or extraction. Features and operation vary between individual models.
The common cut-out makes the models potential replacement options, but you must also check roof thickness, clearance, lid design, motor, operation and electrical requirements before determining compatibility.
Yes. TRA Australia recommends professional installation by an appropriately licensed installer. Warranty does not cover faults or damage caused by incorrect installation, including water ingress or electrical damage.
Yes. All TRA 11-inch roof vents in this range include an LED light garnish, providing integrated interior lighting around the roof vent. The roof vent and LED lighting functions vary by model, so check the individual product specifications for operating details.
BEST SELLERS
$229.95Original price was: $229.95.$179.95Current price is: $179.95.$229.95Original price was: $229.95.$179.95Current price is: $179.95.
